Order picking cart KT3
The all-round talent with a whole host of accessories
- System design with individual structure
- Load capacity of up to 300 kg / 661.4 lbs
- High degree of customization possible, including for electrical peripheral devices
The KT3 order picking cart is the basis for many picking jobs. The optional 5th caster makes it particularly agile and easy to maneuver. Whether handle, writing board or wire tray, wire or wooden shelves, you are always best equipped with the KT3.
The basic model
Standard equipment: Chassis made of square tubing with welded bottom tray. Side panels made from square tubing frame with wire lattice, inserted into chassis and screwed into place.
Casters: 4 Wanzl swivel casters, diameter 125 mm / 4.9 inches, rubber tread. Including deflector rings made of rubber. Alternatively with set of swivel casters with 2 brakes or 2 fixed casters.
Finish: High-gloss, galvanized, chrome-plated.
The cart can be customized with a range of equipment. We offer a fast delivery program with shorter delivery times for selected equipment elements.
Basic measurements
Length: 900, 1,300 or 1,700 mm / 35.4, 51.2 or 66.9 inches
Width: 467 or 625 mm / 18.4 or 24.6 inches
Height: 1,630 or 1,830 mm / 64.2 or 72 inches
Caster set
[1] Caster set with 4 swivel casters (standard)
4 Wanzl swivel casters diameter 125 mm / 4.9 inches, rubber tread.
[2] Caster set with 2 brakes
4 Wanzl swivel casters 125 mm / 4.9 inch diameter, incl. 2 with brakes. Rubber tread.
[3] Caster set with 2 swivel and 2 fixed casters
4 Wanzl casters 125 mm / 4.9 inch diameter, rubber tread.
Static elements
If the cart has a load of more than 50 kg / 110.2 lbs or a ladder (accessory) is used, at least 1 static element must be fitted.
[4] Screwed-in wire shelf
The wire shelf is screwed in at the upper end between both side panels. Mesh size 100 x 30 mm / 4 x 1.2 inches
[5] Fixed pole
The connecting tube is screwed in between the two side panels on the top end.
[6] Rear panel
The grid back panel not only prevents the goods from slipping through, but thanks to its static properties also increases the load capacity of the cart to 300 kg / 661.4 lbs. Mesh size 50 x 50 mm / 2 x 2 inches
Additional accessories
[7] Attachable wire shelves
The wire shelves can be attached at heights at 50 mm / 2 inch intervals. Mesh size 100 x 30 mm / 4 x 1.2 inches Plastic elements for mounting and damping noise.
[8] Push bar
The pushing handles are made from plastic-coated steel tubing. They are available in Ultramarine blue or Flame red.
[9] Ladder
Only possible in combination with a static element! Folding metal ladder with three steps
[10] Writing board
The hanging writing board is fitted with a terminal strip. The angle can be adjusted separately.
[11] 5th caster
Mechanical version. The cart can thus be rotated 360° on the spot.
Static elements
If the cart has a load of more than 50 kg / 110.2 lbs or a ladder (accessory) is used, at least 1 static element must be fitted.
[1] Screwed-in wire shelf with 25 mm / 1 inch upstand on both sides
The wire shelf is screwed in at the upper end between both side panels. Mesh size 100 x 30 mm / 4 x 1.2 inches
[2] Screwed-in wooden shelf
The wire shelf is screwed in at the upper end between both side panels.
Additional accessories
[3] Wire shelf with 25mm / 1 inch upstand on both sides
For hooking in. Mesh size 100 x 30 mm / 4 x 1.2 inches Plastic elements for mounting and damping noise.
[4] Wire shelf with 100 mm / 3.9 inch upstand on both sides
For hooking in. Mesh size 100 x 30 mm / 4 x 1.2 inches Plastic elements for mounting and damping noise. With plug-in dividers on request.
[5] Shelf with wooden support
For hooking in. Incl. Plastic elements for mounting and damping noise.
[6] Wire mesh door
Only available in combination with a wire mesh rear panel!
2-leaf wire mesh door with locking mechanism. Mesh size 50 x 50 mm / 2 x 2 inches
[7] Writing board
The coated metal plate can be written on with a piece of chalk.
[8] Note holder
Metal plate with clamping bar for screwing on.
[9] Wire tray
Thanks to the narrow mesh size of 5 x 5 mm / 0.2 x 0.2 inch, your small items are safe here.
Length 235 mm x width 170 mm x height 135 mm / 9.3 x 6.7 x 5.3 inches
[10] Clothes rail
For hooking in. Ideal for transporting hanging goods.
[11] Antistatic strap
For reliable voltage dissipation. Fitted on chassis or on 5th caster.
[12] Lithium-ion battery 20 Ah
In combination with an inverter, our battery offers a mobile electricity supply for suitable peripheral drives such as printers, scanners or monitors, for example. Multi-shift operation is ensured by the quick-change battery pack system.
