Galaxy Gate® 1.1

An elegant access gate with innovative technology

  • Front signalling ensures clear customer guidance
  • Integrated running light for easier orientation
  • High level of security thanks to integrated sensors

With its extra high safety glass swivel arms and various equipment options, the Galaxy Gate® 1.1 ensures reliable access control

Preview Galaxy Gate® 1.1
Brochure
Galaxy Gate® 1.1
Other languages
Preview Galaxy Gate & Galaxyport Protect
Brochure
Galaxy Gate & Galaxyport Protect
Preview Full catalogue Airport Solutions
Brochure
Full catalogue Airport Solutions
Other languages
Preview Fit for Future
Brochure
Fit for Future
Other languages
Your contact person
Send request

Sensors

The Galaxy Gate® 1.1 is equipped with integrated, intelligent sensor technology. This sensor system detects if a person is attempting to gain unauthorised access. The following improper conduct is detected by the sensor system:

Tailgating

Tailgating
a person without authorisation follows a person with authorisation.

Coming from the opposite direction

Coming from the opposite direction
As one authorised individual passes through the Galaxy Gate in one direction, another person tries to go through it from the other direction.

Unauthorised holding open of the gate

Unauthorised holding open of the gate
When a person stays longer than usual in the Galaxy Gate's swivel area in order for an unauthorised person to gain access.

Crawling under

Crawling under
When a person tries to crawl under the swivel arms of the Galaxy Gate.

Unauthorised climbing over

Unauthorised climbing over
Tall swivel arms of up to 1800 mm in height make it difficult to climb over them.

Pushing open

Pushing open
Forcibly pushing or pulling the swivel arms open. Info: It is possible to push the swivel arms open for reasons of safety in emergencies; however, this cannot happen without it being noticed.

Safety zones

Safety zones
Staying in the sensor area for a long period is regarded as manipulation and an alarm is triggered.

Passage with a trolley

Passage with a trolley
The Galaxy Gate can be passed through with a luggage trolley or transport trolley, and will only close once the individual and trolley have passed through.

Monitoring of the swivel area

Monitoring of the swivel area
If any object with a minimum size of 10 cm³ is left in the swivel area, this is detected and an alarm is triggered.

Safety

What happens if there is a fire alarm in the building?

What happens if there is a fire alarm in the building?
The Galaxy Gate is fitted with fire alarm contacts as standard. In the event of a fire alarm, the swivel arm automatically opens in the direction of escape.

Can I manually activate emergency opening? 

Can I manually activate emergency opening? 
 It is possible to open the passages at any time using the emergency open switch (optional) that can be positioned on the gate or externally.

What happens in the event of a power failure? 

What happens in the event of a power failure? 
The swivel arms can be freely rotated when there is no active power supply. When mains power is restored, the swivel arms automatically return to their basic position.

How do I configure access authorisation?

It is often useful to integrate existing scanners that are already used for access control at the site. Alternatively, we can select a scanner for you based on your security requirements.

Technology

Authorisation-based opening

Different authorisations can be used so the swivel arms open either through 90° or, for example, only through 30° so that the gate can enable different passage widths, and thereby reduce the level of investment needed. The application of the gate is adapted to each individual customer. The reduced opening (30°) of a wide passage ensures a high passage rate and smooth separation of individuals.

Galaxy Gate® 1.1 Hygiene – optional equipment

Disinfectant dispenser

The Galaxy Gate can also be optionally equipped with a disinfectant dispenser and a thermal imaging camera with an info screen. This means the gate will only open following hand disinfection and a body temperature measurement. The thermal imaging camera reliably detects the use of mouth and nose coverings, or accordingly instructs users to wear one.

Thermal imaging camera, info screen

The built-in thermal imaging camera has been specially developed for measuring body temperature and reliably provides alerts if values above the limit are detected. The info screen can also provide notification that the measurement has been performed.
Technical details:

  • 160 × 120 pixel thermal detector
  • Point, line and zone for temperature measurement
  • Temperature measuring range: 30°C to 45°C; measurement accuracy: ±0.5 °C
  • 3D DNR, improvement of image details 

Checking of COVID-19 vaccination certificates

The entrance system can be equipped with an optional reader for COVID-19 vaccination certificates. Entry is only permitted with a valid certificate. In addition, QR code data can be compared with ID data using a scanner for ID documents.
Ideal for hospitals and care facilities: The vaccination certificate control system can also be combined with a thermal imaging camera for body temperature measurement and a disinfectant dispenser for even greater infection control.

People counting

A people counting system counts the number of people entering or exiting through a passage. The current count can be displayed on an external screen or directly on the gate’s info screen. Differential counting (optional) ensures that the maximum occupancy level is not exceeded. The bag search function (optional) randomly blocks individuals from entering.

Application management

The Galaxy Gate application management is available in an online and offline version. The online version can, for example, manage external machines, payment stations, card readers and other peripheral devices with each other. The remote connection ensures rapid and effective support when needed. The offline version integrates existing scanners that are already used for access control at the site. A voltage-free closing contact opens the gate in the relevant direction. The gate processes the workflow autonomously and reliably, in line with the respective security requirement.

Wanzl Access Manager

The Galaxy Gate can be controlled with Wanzl Access Manager. Wanzl Access Manager links peripheral devices to a homogeneous software suite that validates users and operators in almost real time at any access control point

Downloads for architects and technical planners

CAD data

 

Tender documents

 

BIM data – requires free registration

References

Success stories

SWR Stuttgart (D)

Added safety for SWR Südwestrundfunk Stuttgart